Installation · 4 min

How to switch your pool from chlorine to salt with salt electrolysis, step by step

4 min read

Mar 26, 2026

This article is a technical roadmap designed to help you understand the exact process to switch your pool from chlorine to salt. By the end, you will know how to integrate BSPOOL technology to eliminate chemical chlorine, save on maintenance and improve bathers’ health.

To switch your pool from chlorine to salt professionally, you must install a salt chlorinator using a bypass on the return pipe. The process requires adding 5 kg of salt per m³ of water and synchronising the unit with the filtration pump so that chlorine production is automatic and safe. With a BSPOOL system, this transition guarantees crystal-clear water with minimal maintenance

Contents

  • Preliminary analysis: Is my pool compatible with salt?
  • Technical installation: The bypass and the electrolysis cell.
  • The brain of the system: Connectivity and control with EVO units.
  • Water chemistry: Salt dosing and parameter adjustment.
  • Start-up: Final configuration.
  • Why choose BSPOOL technology?

Pool automation has gone from being a luxury to being the standard of efficiency. If you are looking for smart water management, switching your pool from chlorine to salt with a BSPOOL unit is the smartest step you can take.

Why is switching your pool from chlorine to salt the best investment?

Many users ask what the differences between a chlorine pool and a salt pool are. While the traditional system depends on adding chemicals by hand, electrolysis generates disinfectant naturally. By switching your pool from chlorine to salt, you improve skin quality, avoid eye irritation and drastically reduce spending on chemical supplies.

Preliminary analysis and system compatibility

Before switching your pool from chlorine to salt, the filtration equipment must be in perfect condition.

  • Metal check: It is essential to make sure the water does not have high concentrations of iron or copper, to protect the cell electrodes.
  • Surfaces: This system is compatible with mosaic tiles, liner or polyester.

Installing the electrolysis cell (bypass)

For switching your pool from chlorine to salt to be effective, the cell must be installed on a bypass.

  • Cutting the pipe: Make the cut in the return pipe after the filter.
  • Ball valves: Install three valves to create the bypass; this lets you clean the BSPOOL cell without stopping filtration.
  • Location: Always place the cell at the highest point to avoid air build-up.

Connectivity and control: the BSPOOL control panel

When switching your pool from chlorine to salt, the control panel becomes the brain of the system. Units such as the EVOBASIC or TOUCH EVO ranges should be installed following these guidelines:

  • Synchronisation: The unit should only produce chlorine when there is water flow, connecting it to the filtration pump output.
  • Control sensors: For full automation, install pH and Redox probes that automatically regulate corrector injection and chlorine generation.

Salt dosing and chemical balance

A critical part of switching your pool from chlorine to salt is preparing the water.

  • Salt calculation: Add exactly 5 kg of salt per m³ of water.
  • Dissolving: Pour in the salt with the pump in recirculation mode and wait at least 24 hours before switching on the chlorinator.
  • Alkalinity adjustment: Keep it between 80 and 120 ppm to avoid sharp pH fluctuations.

Configuration and start-up

Once the hardware is installed, the last step in switching your pool from chlorine to salt is configuring the BSPOOL device. Thanks to our advanced technology, you can:

  • Calibrate probes: Use calibration solutions to ensure accurate readings.
  • Set set points: Define the target values so the system works autonomously.

Benefits of automation with BSPOOL

Switching your pool from chlorine to salt with our technology guarantees crystal-clear water 365 days a year with minimal effort. As well as saving money, you contribute to water sustainability by reducing the use of harsh chemicals.

Conclusion

Deciding to switch your pool from chlorine to salt is not just a technical upgrade; it is a commitment to health and comfort. With the robustness of BSPOOL systems, this transition is simple, durable and highly efficient.

Are you ready to take the step?

Explore our product catalogue and discover the ideal unit to switch your pool today.

Keep exploring

Related articles Related

View all

Got a question that none of our articles answers?

Our technical team replies in writing within 24 business hours, and the official service network covers all of Spain.