Installation · 2 min

How to install a BSPOOL salt chlorination system

2 min read

May 13, 2025

Installing a salt chlorination system is an efficient, sustainable solution to keep your pool water clean and free from harsh chemicals. Below, we explain how to install a salt chlorinator step by step, using the EVOBASIC unit as a reference.

1. Prepare the pool

Before installing the unit, it is essential to add salt to the water. A concentration of 5 kg/m³ (or 5 g/l) is recommended. Make sure the chlorinator is switched off and keep the filtration system running for 3-4 hours to dissolve the salt completely.

Example: For a 60 m³ pool, you will need around 300 kg of salt.

2. Check the chemical balance

Adjust the pH to between 7.2 and 7.6. Correctly balanced water ensures the chlorination system works properly and disinfects effectively.

3. Install the unit

  • Cell location: Install it vertically and at the highest possible point of the filtration circuit, always after the filter.
  • Hydraulic layout: A bypass is recommended to make maintenance easier.
  • Electrical connections: The installation must include suitable electrical protection (residual current device and circuit breaker) and a good earth connection.
  • Probe location: If you use redox and pH probes, install them vertically after the filter and before the production cell. Keep a minimum distance of 50 cm from the production cell to avoid stray currents affecting the reading.

4. Start-up

With the salt dissolved and the pool balanced:

  • Switch on the unit.
  • Set the operating mode to “manual” (if working without probes) or automatic (if using a redox probe).
  • Configure the parameters: chlorine production, pool volume, desired pH if a pH probe is installed, etc.

5. Basic maintenance

Clean the electrolysis cell regularly and check the probes (pH, Redox or free chlorine). The system includes automatic cleaning, but a check at the start of the season is recommended.

Installing a salt chlorination system such as the EVOBASIC is easy if you follow these steps. You will not only improve water quality, but also reduce the use of chemicals and extend the life of your pool. For more information, see our EVOBASIC user manual, where you will find all the detailed information you need.

Keep exploring

Related articles Related

View all

Got a question that none of our articles answers?

Our technical team replies in writing within 24 business hours, and the official service network covers all of Spain.