SAFETY AND MAINTENANCE · 3 min
Salt chlorination and safety: the smart technology that guarantees your peace of mind
Adding salt to a pool seems like a simple task: you calculate the pool volume, buy the corresponding bags and pour them into the water. However, at the BSPool technical service we constantly see how this simplified formula creates imbalances that shorten the lifespan of electrolysis cells and compromise water disinfection.
1. Theoretical vs. actual salinity
As a general rule, most domestic salt chlorination systems (such as the Touch Evo range) work within an optimal range of 4 to 5 g/l of salt. If your pool holds 50 m³, theory says you need exactly 200 kg of salt (8 bags of 25 kg).
But this calculation overlooks a critical factor: the mains or well water you fill the pool with already contains minerals and an initial salinity level ranging from 0.1 to more than 0.8 g/l. Not measuring this starting value before adding the product usually results in unnecessary overdosing that overloads the equipment
2. Common causes of salt loss
Salt does not evaporate, but it is lost. These are the three main ways in which the concentration steadily decreases throughout the season:
- Frequent filter backwashing: Every time you backwash and rinse your sand or glass filter, you send salt water straight down the drain. When you top up with mains water, you dilute the salt concentration.
- Splashing and heavy use: Physical water loss from daily swimming (especially with children or in community pools) removes salt that will be replaced by fresh, unsalted water.
- Heavy rainfall: A spell of intense storms adds a considerable layer of fresh surface water, temporarily lowering the chlorinator reading if the water is not properly recirculated
3. How to measure it with professional accuracy and avoid breakdowns?
Don’t blindly trust a one-off reading if the water is cold (below 15 °C), as conductivity changes and the unit’s sensor may give a falsely low salinity reading. Before blindly adding more bags, we professionals recommend working with analytical automation.
The smart solution: automation and BSLINK To eliminate manual guesswork, BSPool salt electrolysis systems include smart diagnostics:
- Continuous parameter readings: Analytical kits such as the Kit Auto Touch or Kit Advanced Touch automatically adjust chlorine production and pH dosing to compensate for imbalances without the risk of excess chemicals.
- Active protection (Kit Sonda Agua): Automatically disconnects the cell to prevent breakdowns caused by lack of flow or air pockets.
- Remote control with BSLINK: Receive real-time alerts on your smartphone if salt or temperature levels drop below optimal ranges, giving you complete peace of mind about your pool wherever you are.
-
3 min read
-
4 min read
-
3 min read
Water quality and maintenance
Green water and extreme heat: how to recalibrate salt chlorination and filtration cycles during heatwaves
-
3 min read
Water quality and wellbeing
Filter system and salt chlorinator: technical parameters to turn your pool into a chloramine-free spa
-
3 min read
Water quality and wellbeing
Salt electrolysis and dermatitis: how to eliminate chloramines and protect sensitive skin
-
4 min read
Got a question that none of our articles answers?
Our technical team replies in writing within 24 business hours, and the official service network covers all of Spain.